Understanding your MEPCO meter reading helps you calculate electricity units, compare your bill reading, and identify wrong billing before payment. This guide explains meter reading in simple English and Urdu for Pakistani electricity consumers.
Meter reading is the total number of electricity units recorded by your electricity meter. MEPCO uses this reading to calculate how many units you consumed during the billing month.
You can read your meter by following these simple steps:
Find the electricity meter installed outside your home, shop, office, or business premises.
Note the main numbers shown on the meter screen. These numbers show total electricity units recorded.
If your meter shows small decimal digits, focus on the main whole-number reading for normal unit calculation.
Write the current meter reading clearly or take a photo for record.
Subtract previous month reading from current reading to calculate consumed units.
To calculate units consumed, subtract the previous bill reading from the current meter reading.
Current Reading = 15,750
Previous Reading = 15,200
Units Consumed = 15,750 - 15,200 = 550 Units
This calculation helps consumers estimate their monthly electricity usage before the bill arrives.
Check the current reading printed on your bill and compare it with the actual meter display. If the bill reading is much higher than your meter display, take a clear photo and contact MEPCO for bill correction or meter inspection.
Take a clear photo every month so you can compare it with your bill.
Verify bill reading before paying if your bill amount looks unusually high.
Weekly reading checks help identify sudden electricity usage increases.
If meter screen is blank or damaged, submit a meter complaint quickly.
میپکو میٹر ریڈنگ چیک کرنے کے لیے سب سے پہلے اپنے گھر یا دکان کے بجلی میٹر پر موجود نمبر دیکھیں۔ یہ نمبر آپ کی موجودہ ریڈنگ ہوتی ہے۔ پھر اپنے پچھلے بل پر لکھی ہوئی پچھلی ریڈنگ دیکھیں۔
موجودہ ریڈنگ میں سے پچھلی ریڈنگ منفی کریں۔ جو جواب آئے گا وہ آپ کے استعمال شدہ یونٹس ہوں گے۔
مثال: موجودہ ریڈنگ 15750 ہے اور پچھلی ریڈنگ 15200 ہے۔
15750 - 15200 = 550 یونٹس
اگر آپ کے بل میں لکھی ہوئی ریڈنگ اصل میٹر ریڈنگ سے زیادہ ہو تو فوراً میٹر کی تصویر لیں اور میپکو دفتر میں بل درستگی یا میٹر کمپلینٹ جمع کروائیں۔
MEPCO meter readers visit your premises once every month (roughly every 28 to 31 days) to note down the current units and take a snapshot of the display for proof.
If the reading printed on your bill is higher than the actual display on your physical meter, take a clear photo of the meter dial immediately and visit your nearest customer service subdivision office for bill correction.
Yes, digital meters rotate through various screens like date, time, and total kilowatt-hours (kWh). Wait for the numbers followed by the "kWh" sign—that is your current accumulated reading.
High readings can happen due to continuous use of heavy appliances (ACs, water pumps, heaters), short-circuiting/internal wiring leakage, or occasionally due to a technical fault in the meter itself.